Weight transmitter module

Weight Transmitter-ARS-U

Input: one analog load cell

output: RS485/RS232/4-20mA MODBUS-RTU AVAILABLE

Replace Anyload A2P Load cell amplifier weight transmitter

Replace Anyload A2P Load cell amplifier weight transmitter

Built-in 24 bits Σ-Δ integrated ADC chip for weighing conversion;
Full digital conversion, no potentiometer or any other analog conditioning components;
Analog output two-button calibration, it only needs calibrate once of zero and full.
1 Accuracy: 1/10000
2 Non-linearity: ≤0.008%F.S
3 Zero temperature drift: ≤0.4μV/℃
4 Temperature coefficient of span: ≤10ppm/℃
5 Net input range of full capacity: -30 mV ~ +30mV
6 Sensitivity of analog input signal: 0.5uV /d (Min.)
1.5uV/d (Recommend)
7 Calibration range: +- 50%FS
8 Display: No display
9 Working temperature: -30℃~ 60℃
10 Relative humidity: ≤ 90%(No condensation)
11 Power supply: +18 ~ +26VDC,>0.5A
12Load cell bridge voltage: DC 5V 1.5A Can max connect with 8 pieces of load cells whose impedance > 350Ω
13 Output optional: 0~5V,0~10V,4~20mA(DIP switch selection)

Replace 30t canister toledo load cell for truck scale

Self-restoring rocker pin load cell

Suitable for Truck scale, railway scale, axle wheel scale, floor scale

Special features 

   Self-restoring function

   Nominalloads:10t-50t Simple to install

   Laser welded ,IP68

   Optimized for parallel connection by comer pre-adjustment

   Meets EMC/ESD  requirements According to EN 45 501

Truck scale

Middle dissected, with a top cover on the platform for access to the load cells

Specifications:

• Width available: 3m,3.2m,3.4m
• Usual length available: 6m,7m,8m,9m,10m,12m, 14m,16m,17.4m,18m,21m,24m
• Different max. capacity customized according to customer’s needs, max. can be up to 300t for special use.
• In one 40’ container, we can load 2 units of 18m or 2 units of the one less long than 18m.  

Dynamic portable vehicle axle weighing truck scale

INPT012-Dynamic Series Portable Axle Truck Scales

(2pads,4ramps and 1 inidcator)

Features

.  Ultra-low, hard aluminum alloy pad, integrated design

.  High strength, good repeatability

.  Antirust, insterting-in and pulling-out seamless connection, waterproof

.  Automatically distinguish vehicle axle model, check if vehicle is overloaded or not automatically.

   Humanized software and hardware design 

.  With high grade aluminum suitcase, metallic painted, portable.

Standard M1 500kg iron cast SCALE TESTING CALIBRATION WEIGHTS

Standard M1 500kg iron cast SCALE TESTING CALIBRATION WEIGHTS

Replace Anyload A2P Load cell amplifier weight transmitter

 

Built-in 24 bits Σ-Δ integrated ADC chip for weighing conversion;
Full digital conversion, no potentiometer or any other analog conditioning components;
Analog output two-button calibration, it only needs calibrate once of zero and full.
1 Accuracy: 1/10000
2 Non-linearity: ≤0.008%F.S
3 Zero temperature drift: ≤0.4μV/℃
4 Temperature coefficient of span: ≤10ppm/℃
5 Net input range of full capacity: -30 mV ~ +30mV
6 Sensitivity of analog input signal: 0.5uV /d (Min.)
1.5uV/d (Recommend)
7 Calibration range: +- 50%FS
8 Display: No display
9 Working temperature: -30℃~ 60℃
10 Relative humidity: ≤ 90%(No condensation)
11 Power supply: +18 ~ +26VDC,>0.5A
12Load cell bridge voltage: DC 5V 1.5A Can max connect with 8 pieces of load cells whose impedance > 350Ω
13 Output optional: 0~5V,0~10V,4~20mA(DIP switch selection)

Open type electronic hanging scale-OCS-HS

FEATURE:

*ZERO/TOTAL/KEEP

*AUTOMATIC ZERO TRACKING

*OVERLOAD ALARM

*ANTI SWAY EFFECT

*ALUMINUM ALLOY SHELL

*5 LARGE DIGITAL TUBE DISPLAY (30MM HIGH CHARACTERS)

*DIVIDING THE VALUE OPTIONAL

*LOW VOLTAGE AUTO POWER-OFF

*BATTERY SUPERVISION

*KG/LB/N CONVERSION

Enhanced rotary crane scale-OCS-RT03

Enhanced rotary crane scale-OCS-RT03

FEATURE:

*TARE SET/TOTAL/DELETE/CLEAR TOTAL/VIEW TOTAL

*DIE-CASTING ALUMINUM ENCLOSURE

*STAINLESS STEEL SHACKLE

*ROTABLE HOOK

*WATER-PROOF PANEL BUTTON

*INFRARED REMOTE CONTROL

*RESOLUTION SWITCH

*ANTI-MOTION SET

BASIC FUNCTION:

TARE SET

TOTAL/DELETE/CLEAR TOTAL

VIEW TOTAL

RESOLUTION SWITCH

AUTO-OFF TIME SET

IDLE TIME SET

LUMINANCE SET

DISPLAY SPEED SET

ANTI-MOTION SET

MINI HANGING SCALE

MINI HANGING SCALE-OCS-WTH01

FEATURES:

* FROM THE SPECIAL SENSOR AND WIRELESS PLAM INTEGRATION IN ONE OF THE WIRELESS DATA TRANSMISSION TYPE DYNAMOMETER

*WEIGHT NOT EXCEEDING 2KG SENSOR AND PROTABLE PLAM TABLE, SUITABLE FOR OUTGOING MEASUREMENT OPERATION.

*MORE THAN 250 FEET OF DATA TRANSMISSION DISTANCE, SO YOU CAN STAY AWAY FROM UNSAFE OR CONTAMINATED ENVIRONMENT.

*BREAKTHROUGH OF HIGH PRECISION, LOW POWER RADIO TRANSMISSION, SO THAT THE PRODUCT

*hOLE PIN FAST ASSEMBLING STRUCTURE, SENSOR WITH OVERLOAD PROTECTION DESIGN, LET YOUR SWEET COMFORT.

*BUILT IN LITHIUM LON BATTERY, SUPPORT 7.2V FAST CHARGING, A CHARGING 24 HOURS OF CONTINUOUS WORK. 

Single point load cell

Single point load cell IN1004

Aluminum

Creep precision up to 0.005%

working video:https://youtu.be/5DuzXmzG-7Q

Interchangeable Products

• Vishay Tedea 1004

Mobile truck scale

Mobile truck scale -IN6677

mobile truck scale Specifications:

• mobile truck scale No need foundation
• With frame, with 2 ramps reversible onto the top platform, with 4 movable wheels
• mobile truck scale Maximum weighing ≤ 60T
• Size available: 2x3m, 2.5x4m, 2.5x5m, 2.5x6m, 3x5m, 3x6m, 3x7m,3x8m,3x9m(any size less than 9m)

Replace Yaohua T6 weight indicator

Weight indicator for platform scale replace Yaohua T6

Static Charging generator with remote controller/static adsorption/IML static

Charging generator is widely used in industrial production (film, painting,flocking, sorting) field and 

scientific research etc.. The advantages is small volume, easy installation, stable work etc..

Charginggenerator is driven by electrostatic transmitter (bar) and DC high voltage Generator. 

DC high voltage Generator for electrostatic transmitter (rod) provides a negative (or positive) pressure, 

the electrostatic transmitter (rod) emission negative (or positive), then make the 

object(work piece) charge (artificial charge). The higher the voltage, the greater the effective range.

Stepless pressure regulation Charging Generator/creating static/ IML static solution

Charging generator is widely used in industrial production (film, painting,flocking, sorting) field and scientific research etc.. The advantages is small volume, easy installation, stable work etc..

Charging generator 20kv-30kv/IML static solution/Electrostatic adsorption/plastic sorting

ATRAX 420 PLUS weighing indicator

Weighing indicator IN-420PLUS

Interchangeable with 

INDICATOR OF ATRAX 420 PLUS

FUNCTION:

• Auto zero scale       • Auto zero tracking      • Normal weighing

• Peak    • Counting      • Zero scale              • Gross/Net        
• Tare      • RS-232C       • RS-485              • Print interface (PS805 Printer)

Bench scale

Bench scale  For weighing cargoes with a few dozen kilograms to several hundreds of kilograms
In accordance with the use of different occasions ,consumption levels and appearance structures,

there are various kinds of Bench scale 

Differentiated by the structure of scale body:  rectangular pipe welded structure,

the round pipe welded structure, pressing structure,  aluminum die-casting structure

Differentiated by the material of platform(cover) :stainless steel 304,  stainless steel 201,

carbon steel scale body powder-coated, carbon steel painting 

Differentiated by the personalized needs of users: ordinary weight bench scale,

counting bench scale, price computing bench scale

Other description:

Platform size: 300mmX300mm～800mmX1000mm
60Kg～1000Kg
Function:  zero, tare, ,zero-tracking, overloading indication, ,AC-DC dual power
accuracy class: Grade III
The scale can be OEM and ODM manufactured according to the customer’s requirement.

Standard M1 500kg iron cast SCALE TESTING CALIBRATION WEIGHTS

Gravimetric feeder/loss-in-weigh feeder for Batching scale

Application: Batching scale

Accuracy up to 0.3g 

Single Screw Loss-in-weight Metering Feeder product is widely applied in the filed of plastic,

rubber, chemical, food, pharmaceutical industry, etc.

1). Generous and beautiful appearance;

2). Small volume;

3). Wide measuring range;

4). Touchscreen output and customized input system designed for easy operation;

5). Low noise;

6). High stability;

7). Easy to clean and maintain;

8). Excellent control system

Share beam load cell

single beam load cell IN-3411

 

Interchangeable Products

 

Vishay-Tedea 3400 load cell

 

S type load cell

 

INS011 S type load cell for tension and compression use

Capacity: 100kg 300kg 750kg 1000kg

Application: Crane scale, test machine

HEAT-PROOF WIRELESS CRANE SCALE

HEAT-PROOF WIRELESS CRANE SCALE OCS-HP01

FEATURES:

*HIGH QUALITY ALLOY STEEL LOAD CELL

*WHOLE STEEL CHROMEPLATED ENCLOSURE

*30mm LED DISPLAY

*HIGH-DUTY BOW SHACKLE

*HIGH-DUTY EYE HOOK

*HIGH CAPACITY RECHARGEABLE BATTERY

*STAINLESS STEEL BUTTON

*INFRARED REMOTE CONTROLLING

*CAPACITY: 1000KG~15000KG

BASIC FUNCTION:

*ZERO

*TARE IN /TARE OUT

*HOLD

*LOW VOLTAGE ALARM

*BATTERY SUPERVISION

*OVERLOAD ALARM/record

*DIGITAL CALIBRATION

*3-POINT LINEARITY CORRECTION

*TOTAL/DELETE/CLEAR TOTAL

*VIEW TOTAL

*RESOLUTION SWITCH

Gravimetric feeder/loss-in-weigh feeder for Batching scale

Application: Batching scale

Accuracy up to 0.3g 

Single Screw Loss-in-weight Metering Feeder product is widely applied in the filed of plastic,

rubber, chemical, food, pharmaceutical industry, etc.

1). Generous and beautiful appearance;

2). Small volume;

3). Wide measuring range;

4). Touchscreen output and customized input system designed for easy operation;

5). Low noise;

6). High stability;

7). Easy to clean and maintain;

8). Excellent control system

Single point load cell IN1004

Single point load cell IN1004

Aluminum

Creep precision up to 0.005%

working video:https://youtu.be/5DuzXmzG-7Q

Interchangeable Products

• Vishay Tedea 1004

single point load cell IN1040

single point load cell IN1040

Aluminum

Creep precision up to 0.005%

Bench scale

Bench scale  For weighing cargoes with a few dozen kilograms to several hundreds of kilograms 

In accordance with the use of different occasions ,consumption levels and appearance structures,

there are various kinds of Bench scale 

Differentiated by the structure of scale body:  rectangular pipe welded structure,

the round pipe welded structure, pressing structure,  aluminum die-casting structure

Differentiated by the material of platform(cover) :stainless steel 304,  stainless steel 201,

carbon steel scale body powder-coated, carbon steel painting 

Differentiated by the personalized needs of users: ordinary weight bench scale,

counting bench scale, price computing bench scale

Other description:

Platform size: 300mmX300mm～800mmX1000mm
60Kg～1000Kg
Function:  zero, tare, ,zero-tracking, overloading indication, ,AC-DC dual power
accuracy class: Grade III
The scale can be OEM and ODM manufactured according to the customer’s requirement.

Standard M1 500kg iron cast SCALE TESTING CALIBRATION WEIGHTS

Standard M1 500kg iron cast SCALE TESTING CALIBRATION 

WEIGHTS

PCB/Main Board for weight indicator-Yaohua T3

This pcb for weight indicator -YAOHUA YH-T3

Main Function: Weight accumulation/accumulation display/accumulation clear function
Kg/Lb swith,saving power mode

PCB for weight indicator-Yaohua T6

Weighing indicator XK3190-T6 is widely applied in electronic platform scale, electronic floor scale and so on alike static weighing system equipped with 1~4 load cell.

Feature:
Low energy consumption design,wide voltage input
High precision Σ-Δ conversion,high PPR
Typical function, easy operation
AC/DC(built in rechargeable battery 6V/4AH) power supply , Auto power off at low battery

Standard function: 

Weight accumulation/accumulation display/accumulation clear function

Kg/Lb swith,saving power mode
 RS232 interface(optional)

Technicals:

Input signal range: -16mV~18mV

Load cell excitation: DC 3V
Max. connection number of load cell: 4 at 350 ohm
Load cell connection mode: 4 wire
Verified counts: 3000
Display: 6 bits LED, 6 status indications
Display range: -99990~99990
Power supply:AC 85-265V;50-60Hz; DC built-in rechargeable 4V/4.5Ah battery