Digital junction box with modbus

Digital junction box with RS485 output +modbus

The digital junction box is based on resistance strain sensor as signal source, 

It is composed of 24bits Σ-Δ type A/D conversion technology and The 8 bit single chip microcomputer etc.large-scale integrated circuit. 

It is with high accuracy, high reliability. 

Main functions:

¨ panel keyboard settings, capacity calibration

¨ Has function to display weight setting. 

¨ Can point out failures, operational error.

¨ RS485 output,Can set the corresponding weight value of 4mA and 20mA. 

Main Technical Parameters

1.  A/D sampling rate:  7.5 Times/s~240Times/s optional
2.  Internal resolution:  24bits
3.  Non-linearity:  ≤0.005%F.S
4.  Zero drift:  ≤0.2μV/℃
5.  Temperature coefficient of capacity:   ≤10ppm/℃
6.  Net input signal range of full capacity:   2~20mV
7.  Initial weight signal range: -1~+9mV
8.  Analog input signal sensitivity:0.5uV /d(Minimum)    1.5uV/d(Recommended)
9.  Zeroing range: 100%FS
10.  Display: 6 red LED digital tubes(height of word is 14mm
11.  Amibent temperature of operation: -5℃~ 45℃
12.  Relative humidity: ≯ 90%(Non condensing)
13.  Power supply: +18 ~ +26 VDC,0.5A
14. Sensor bridge excitation: DC 5V,can connect 6 load cells of 350 ohms or 12 load cells of 750 ohms.

# weight transmitter # load cell amplifier # load cell # weighing # weighing scale # scale 

# static # static solution # static charging # static elimination