0.1G High precision Batching Controller - BS-50000

-------------Accuracy up to 0.1g

Batching Controller Advantages 
 

* Accuracy up to 0.1g

--- Can auto calibrate the close time of valve according to batching speed to reach high precision

*  Output port function for site programming

*  Can be widely applied to chemical, building materials, food, feed and other industries

   quantitative packaging or multi-material automatic batching system.

*  Super strong communication function, so that the host computer can easily and reliably

   send a variety of ingredients to a number of controllers, or from a variety of controllers to

   read a variety of data to form a large-scale batching system.

Batching Controller Function

*Auto zero tracking

*Panel digital calibration, capacity, division value,

decimal point, overload value, zero range all can be

set by panel digital

*Formula table and material table both can be programmed by keyboard and host computer

Can store 10 kinds of formula and material table

of 10 kinds of materials

*Add in weigh & loss in weigh optional

* Can set continuous batching times

* Overshoot value auto modify, jog feeding

* With 4-way programmable switch value input

* With 4-way programmable switch value output

* Gross weight, net weight, tolerance display optional when batching

* Manual discharge, feeding optional

* With WATCH DOG circuit

* With RS232C and RS485 serial communication interface, baud rate optional, can set the

  communication address for multi-machine communication

* Can do various operations by panel keyboard, switching output or host computer

  communication

* Built-in load cell bridge power supply

* With alarm like overload, underload, over tolerance, material blocking and other

  working state prompt

Aluminum Tension S Type Load Cell IN-HZ-MS-005

Mainly applied in tension and compression testing instruments and automatic equipments fields,

such as small range of force testing instruments, hopper scales, insertion force test instruments,

riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard

switch, and etc.

Capacity	2-200KG	Material	Aluminum
Rated Output	2.0±10%mV/V	Output Impedance	350±3Ω
Zero Balance	±2%F.S.	Insulation	≥5000MΩ/100VDC
Non-linearity	0.05%F.S.	Recommended Excitation	5-10V
Hysteresis	0.05%F.S.	Maximum Excitation	15V
Repeatability	0.05%F.S.	Compensated Temp Range	-10~60ºC
(30)Creep (30min)	0.05%F.S.	Operating Temp Range	-20~80ºC
Temp Effect on Output	0.03%F.S./10ºC	Safe Load Limit	1.2
Temp Effect on Zero	0.03%F.S./10ºC	Ultimate Load Limit	1.5
Input Impedance	406±5Ω	Cable Size	φ4x 3m
Wire Connection	Ex + : Red; Ex - : Black; Sig + : Green; Sig - : White +

Alloy Steel/Stainless Stee Tension S Type Load Cell - IN-HZ-MS-006

Alloy steel/Stainless Steel Tension S Type Load Cell IN-HZ-MS-006

Capacity	10-5000KG	Material	Alloy steel/Stainless Steel
Rated Output	2.0/3.0±10%mV/V	Output Impedance	350±3Ω
Zero Balance	±2%F.S.	Insulation	≥5000MΩ/100VDC
Non-linearity	0.03%F.S.	Recommended Excitation	5-10V
Hysteresis	0.03%F.S.	Maximum Excitation	15V
Repeatability	0.03%F.S.	Compensated Temp Range	-10~60ºC
(30)Creep (30min)	0.03%F.S.	Operating Temp Range	-20~80ºC
Temp Effect on Output	0.025%F.S./10ºC	Safe Load Limit	150%
Temp Effect on Zero	0.025%F.S./10ºC	Ultimate Load Limit	200%
Input Impedance	385±5Ω	Cable Size	φ5x 3m
Wire Connection	Ex + : Red; Ex - : Black; Sig + : Green; Sig - : White

Dynamic Portable Vehicle Axle Weighing Truck Scale-INPT012

INPT012-Dynamic series portable axle scales

(2pads,4ramps and 1 inidcator)

Features

.  Ultra-low, hard aluminum alloy pad, integrated design

.  High strength, good repeatability

.  Antirust, insterting-in and pulling-out seamless connection, waterproof

.  Automatically distinguish vehicle axle model, check if vehicle is overloaded or not automatically.

   Humanized software and hardware design 

.  With high grade aluminum suitcase, metallic painted, portable.

Specifications 

Model	INPT012-10	INPT012-15	INPT012-20	INPT012-30
Platform size(LxWxH)	700x430x30mm
Axle load	10t	15t	20t	30t
Display division	20kg	50kg	50kg	50kg
Weighing accuracy(static)	±0.1~0.3%F.S.
Dynamic	±3~5%F.S.
Safe overload	150% F.S.
Weighing speed	≤5km/h
Power	AC and DC power supply

Mobile Truck Scale

mobile truck scale Specifications:

• mobile truck scale No need foundation
• With frame, with 2 ramps reversible onto the top platform, with 4 movable wheels
• mobile truck scale Maximum weighing ≤ 60T
• Size available: 2x3m, 2.5x4m, 2.5x5m, 2.5x6m, 3x5m, 3x6m, 3x7m,3x8m,3x9m(any size less than 9m)

Wireless Portable Dynamic Axle Truck Scale

portable truck scale INPT011

/wirelss Portable wheel&axle weighing system /Dynamic portable truck scale 

Parts
2 pcs wlreless weighing pads	1 pcs wireless weighing indicator	Charger,Print paper, colored tape

 

Dynamic portable truck scale 

· • Capacity: ① wheel weight:≤10,15,20T ②Axle weight:≤20,30,40T                      ③ Total weight ≤1000T(≤18 axle) · • Dynamic comprehensive error(%F.S): 3 (5~10km/h) · • Static comprehensive error(%F.S): 0.3 · • Product weight: ① weighing pad:27Kg /pcs ②indicator:8Kg/pcs · • Prdocut size: ① weighing pad’s size:870×470×25mm                            ② indicator’s size:400×300×170mm  · • Defend grade: ① weighing pad:IP66 ② indicator:IP65  · • Deposit: ① Temp. range: -30～+80℃ ② Relative Humidity:＜90%RH  · • Vehicle axle weight is measured axle by axle, and the max number is unlimited.  · • Ultra high frequency ensures better anti-electromagnet ability. · • Floating technology is adopted to remove zero drift  · • Digitization menu,easy operation · • Micro printer is embedded in the wireless instrument, the print ticket contains date,       time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and       executive organization  · • RS232 port is used to communicate with PC.                • AC/DC, real time battery capacity indicating.  Dynamic portable truck scale-- The battery can be used for 40 hours on end. Automatic shut off;

Bench scale

Bench scale  For weighing cargoes with a few dozen kilograms to several hundreds of kilograms
In accordance with the use of different occasions ,consumption levels and appearance structures,

there are various kinds of Bench scale 

Differentiated by the structure of scale body:  rectangular pipe welded structure,

the round pipe welded structure, pressing structure,  aluminum die-casting structure

Differentiated by the material of platform(cover) :stainless steel 304,  stainless steel 201,

carbon steel scale body powder-coated, carbon steel painting 

Differentiated by the personalized needs of users: ordinary weight bench scale,

counting bench scale, price computing bench scale

Other description:

Platform size: 300mmX300mm～800mmX1000mm
60Kg～1000Kg
Function:  zero, tare, ,zero-tracking, overloading indication, ,AC-DC dual power
accuracy class: Grade III
The scale can be OEM and ODM manufactured according to the customer’s requirement.

Load Cell Junction Box/Amplifier/Weight transmitter/Conversion

The digital junction box is based on resistance strain sensor as signal source, It is composed of 24bits Σ-Δ type A/D conversion technology and The 8 bit single chip microcomputer etc.large-scale integrated circuit. It is with high accuracy, high reliability. 

Main functions:

¨ panel keyboard settings, capacity calibration

¨ Has function to display weight setting. 

¨ Can point out failures, operational error.

¨ 4~20mA/RS485/RS232 output,Can set the corresponding weight value of 4mA and 20mA. 

2. Main Technical Parameters

¨ 2.1 A/D sampling rate:  7.5 Times/s~240Times/s optional

¨ 2.2 Internal resolution:  24bits

¨ 2.3 Non-linearity:  ≤0.005%F.S

¨ 2.4 Zero drift:  ≤0.2μV/℃

¨ 2.5 Temperature coefficient of capacity:   ≤10ppm/℃

¨ 2.6 Net input signal range of full capacity:   2~20mV

¨ 2.7 Initial weight signal range: -1~+9mV

¨ 2.8 Analog input signal sensitivity:0.5uV /d(Minimum)

          1.5uV/d(Recommended)

¨ 2.9 Zeroing range: 100%FS

¨ 2.11 Display: 6 red LED digital tubes(height of word is 14mm

¨ 2.14 Amibent temperature of operation: -5℃~ 45℃

¨ 2.15 Relative humidity: ≯ 90%(Non condensing)

¨ 2.16 Power supply: +18 ~ +26 VDC,0.5A

2.17 Sensor bridge excitation: DC 5V,can connect 6 load cells of 350 ohms or 12 load cells of 750 ohms.  

IN-C16D digital column load cell for truck scale

Column load cell

 

Stable quality in the long term.

 

Load cell Suitable for truck scale

 

Interchangeable with HBM LOAD CELL MODEL C16

 

Output: RS485, Modbus available.

 

 

300X300mm~600X800mm Waterproof Stainless Steel Bench Scale-WF-BS

WF-BS China Wholesale low price 300X300mm~600X800mm

Waterproof Stainless Steel Bench Scale

 

Model	Size (mm)	Capacity(kg)
WF-BS3030	300X300	30~150
WF-BS3040	300X400	30~150
WF-BS4050	400X500	30~300
WF-BS4560	450X600	50~300
WF-BS5060	500X600	50~600
WF-BS6060	600X600	100~600
WF-BS6080	600X800	100~600

Description of WF-BS Bench Scale:

1). Completely 304 stainless steel structure, With stainless steel waterproof protection.

     Stainless steel fixed foot or black rubber foot is optional.
2). It is well used in damp or harsh environment, such as meat or fish processing plant,

     pharmaceutical and chemical industries.
3). 304 Stainless steel rectangular top cover or round corner top cover.
4). With bracket (304 stainless steel) and column (Φ38mm stainless-steel tube)

     for the indicator.
5). With the special column for waterproof indicator.
6). Optional Zemic OIML load cells or KELI load cell for this bench scale.

Pallet Scale-IN-FL017

Pallet scale achieves weighing when the goods is carried.

The indicator is with storage battery. The surface finishing for scale is powder coated.

This product is basically free of maintenance.
Pallet scale  Matching with indicators and anti-explosion batteries, anti-explosion junction boxes,

adopting coppery wheels, it becomes explosive proof pallet scales.

Pallet scale Parameters:
Capacity:1t, 1.5t, 2t
Pallet scale Fork length: 1220mm
Fork outside distance: 560mm, 690mm
Minimum height above the ground of fork: 80mm

A Series Pallet Scale    

                          

B Series Pallet Scale    

                                                                     

C Series Pallet Scale

D Series Pallet Scale

300X300mm~600X800mm Waterproof Stainless Steel Bench Scale-WF-BS

WF-BS China Wholesale low price 300X300mm~600X800mm

Waterproof Stainless Steel Bench Scale

 

Model	Size (mm)	Capacity(kg)
WF-BS3030	300X300	30~150
WF-BS3040	300X400	30~150
WF-BS4050	400X500	30~300
WF-BS4560	450X600	50~300
WF-BS5060	500X600	50~600
WF-BS6060	600X600	100~600
WF-BS6080	600X800	100~600

Description of WF-BS Bench Scale:

1). Completely 304 stainless steel structure, With stainless steel waterproof protection.

     Stainless steel fixed foot or black rubber foot is optional.
2). It is well used in damp or harsh environment, such as meat or fish processing plant,

     pharmaceutical and chemical industries.
3). 304 Stainless steel rectangular top cover or round corner top cover.
4). With bracket (304 stainless steel) and column (Φ38mm stainless-steel tube)

     for the indicator.
5). With the special column for waterproof indicator.
6). Optional Zemic OIML load cells or KELI load cell for this bench scale.

EXPLOSION-PROOF WEIGHT INDICATOR

EXPLOSION-PROOF WEIGHING INDICATOR-100XD

Suitable for weighing in explosion-proof area 2. especially used in industrial of chemical and medicine.

 

Exprosion proof class: ExdⅡBT

* aluminum shell weight indicator

* A/D resolution:800000

* Display resolution:30000

* A/D transfer ratio: 80times/s.

* Exitation power supply for load cell:+5VDC,max.power 10mA. 

* can drive 4 load cell of 350Ω

* Temperature effect on zero:≤0.15μV/℃

* Temperature effect on output:≤10μV/℃

* non-linearity:≤0.01%F•S

* Power supply: input voltage:220VAC(-15%～+10%)/50Hz

        output voltage:9V/800mA

* size:285×260×160(length*width*heighth)mm

* RS232C interface

* RS485 interface (available)

4-20MA output

Weighing Indicator for Truck Scale IN-B10E

  Main Features

◆ AC and DC Power, when equipped with 6 v battery, without the ac power input can also weigh 

    and print as normal

◆ Options for automatic zero or memory start when starting up it

◆ Automatic zero point tracking

◆ Under load alarming and overload warning

◆ Calibration of capacity with keyboard

◆ Non-linearity calibration, automatic dividing value switching

◆ Date, time, truck No., cargo No. setting

◆ Real-time calendar clock, with power-off protection

◆ With weighing situation of truck scale and platform scale. In truck scale weighing state, with single 

     weight mode, double weight mode and pure weight mode, three kinds of weight modes. 

     In platform scale weighing state, with automatic work mode and manual work mode

◆ 500 complete weighing data saving, preset tare weight of 400 different truck No.

◆ Check and print according to the weighing date,,truck No, cargo No.,or serial No.

◆ With micro printer, print demo,various weighing statements and preset tare weight tables, etc, 

     can program the content of weight demo

◆ External line printer, optional vertical and horizontal printing demo list, various weighing statements 

     and preset tare weighing tables, etc

◆ With interface of BCD code,can be connected to large screen display

◆ With function of RS232C and RS485,can be connected to a computer and composed a 

     microcomputer weighing system

Main Technical Parameters

       ◆ A/D sampling rate: 7.5 Times/s~60Times/s optional

       ◆ Accuracy class:  Ⅲ,n=3000

       ◆ Net input signal range of full capacity: 2~15mV

       ◆ Initial weight signal range:  -1~+9mV

       ◆ zero setting range: ±4%FS,±10%FS,±20%FS,±50%FS optional

       ◆ Service temperature range: 0~ 40℃

       ◆ Relative humidity:  ≯ 90%(Non condensing)

       ◆ Power supply:  AC 220V(–15%~ +10%)  50Hz±2%

       ◆ Sensor bridge excitation:  DC 5V , can connect 8 load cells of not less than 800W

       ◆ Equipped battery:  6V/4AH

       ◆DC insulation:   > 5 M W

       ◆Voltage-endurance:   AC 1500V(without breakdown in one minute)

       ◆AC leakage current of power frequency: < 3.5 mA

       ◆Outside dimension:   325mm ´210mm ´180mm

       ◆ Weight:  3.2 kg

       ◆Power consumption:  < 15W