2017年3月24日星期五

Digital Junction Box-DJ04-2 With Modbus

Digital Junction Box-DJ04-2 With Modbus

Digital Junction Box-DJ04-2 With Modbus

Digital junction box with RS485 output +modbus

The digital junction box is based on resistance strain sensor as signal source, 
It is composed of 24bits Σ-Δ type A/D conversion technology and The 8 bit single chip microcomputer etc.large-scale integrated circuit. 
It is with high accuracy, high reliability. 

Main functions:
¨ panel keyboard settings, capacity calibration
¨ Has function to display weight setting. 
¨ Can point out failures, operational error.
¨ RS485 output,Can set the corresponding weight value of 4mA and 20mA. 

Main Technical Parameters

  1.  A/D sampling rate:  7.5 Times/s~240Times/s optional
  2.  Internal resolution:  24bits
  3.  Non-linearity:  ≤0.005%F.S
  4.  Zero drift:  ≤0.2μV/℃
  5.  Temperature coefficient of capacity:   ≤10ppm/℃
  6.  Net input signal range of full capacity:   2~20mV
  7.  Initial weight signal range: -1~+9mV
  8.  Analog input signal sensitivity:0.5uV /d(Minimum)    1.5uV/d(Recommended)
  9.  Zeroing range: 100%FS
  10.  Display: 6 red LED digital tubes(height of word is 14mm
  11.  Amibent temperature of operation: -5℃~ 45℃
  12.  Relative humidity: ≯ 90%(Non condensing)
  13.  Power supply: +18 ~ +26 VDC,0.5A
  14. Sensor bridge excitation: DC 5V,can connect 6 load cells of 350 ohms or 12 load cells of 750 ohms.

没有评论:

发表评论