IN-C16 25t30t40t C3 Canister Rocker Pin Load Cell For Truck Scale

IN-C16 25t30t40t C3 Canister Rocker Pin Load Cell For Truck Scale

IN-C16 Self-restoring Rocker pinload cell
----Interchangeable with HBM C16,KELI ZSFY-30T LOAD CELL
-Self-restoring function

-Simple to Install-Laser welded,

IP68-Optimized for parallel connection by cornerpre-adjustment

-Application: Truck scale or other compression weighing devices

Item	UNIT	TECHNICAL DATA
Rated capacity (Emax)	t	10,15,20,25,30,40,,50
Accuracy class		C3
Output(cn)/Zero Balance/	mV/V	2.0 ±0.02 /0±0.02
Minimum LC verification interval (Vmin)	% of  Emax	0.01
Creep over 30min	% of Cn	0.02
Temperature effect on zero	% of Cn/10K	0.02
Temperature effect on output	% of Cn/10K	0.02
Hysteresis	% of  Cn	0.017
Linearity deviation	% of  Cn	0.017
Repeatability	% of  Cn	0.017
Service temperature range		-30 to +70
Limit load & Break load	% of  EMax.	120 /150
Nominal excitation	V	5~12
Input resistance & Output resistance	Ω	700±20 & 703±20
Insulation resistance	M	>5000
Cable length: diameter :Ø6mm	M	14
Cable type		4 conductors, Braid Shielded, Black PVC Jacket
Color code:		+Exc -Red, +Sig-grn, -Exc-Blk, -Sig- Wht
Construction material:		stainless steel / alloy steel
Protection class to IEC529		Ip68

Weighing Controller IN-420-2L

Weighing Controller IN-420-2L

Interchangeable With ATRAX 420 PLUS  INDICATOR

• RS485/RS232 signal output                                                                                                
• 3 Optical coupler RELAYS or 4-20mA (Can set both current and weight value of 4-20mA)

Special Function

• Isolated
• high anti-Anti-jamming

Weight Controller Function:

• Auto zero scale       • Auto zero tracking      • Normal weighing

• Peak    • Counting      • Zero scale              • Gross/Net        
• Tare      • RS-232C       • RS-485

Has an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles

per second and drives up to eight 350Ω or sixteen 700Ω load cells.

COMPLY WITH STANDARD OF NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000.

• COMPLY WITH STANDARD OF NTEP III/IIIL, 10 000 
• COMPLY WITH STANDARD OF Measurement Canada III, 10 000; III HD 20 000
• Material: Iron
• LED 6-digit display
• Power Supply: AC adaptor, 100-240VAC, 50-60Hz
• Parameter and calibration settings are performed on the front panel
• LABRADOR computer software for parameter and calibration settings
• Units of Measurement: kg, lb
• Improper operation and fault indication
• Two way relay signal output
• Equipped with RS-232 and RS-485 connecting ports
• Print functions with programmable print format
• Built-in clock

Weight Controlloer Data

Enclosure Material	Iron
Units of Measurement	kg, lb
Working Humidity	≤90% RH
Working Temperature	-10°C to 40°C/14°F to 104°F
Dimensions (mm)	226mm x 71mm x 161mm
Dimensions (in)	8.9in x 3.7in x 6.34in
Display Type	LCD
Display Digits	6 digits
Digit Height	25.4mm/1in
Display Dimensions	143mm x 41mm/5.6in x 1.6in
Power Supply	AC adaptor, 100-240VAC, 50-60Hz
IP Rating	IP66

  

Division	1, 2, 5, 10
Tare Range	100% of Cn
Maximum Number of Load Cells	8×350Ω or 16×700Ω
Maximum Power Consumption	6VA
Excitation Voltage	5VDC ± 5%
Fusible Link Fuse (slow blow)	1A
Communications Interface	RS-232C, RS-485
Print Interface	Serial interface

Vehicle Wheel & Axle Weighing Pad IN-1DY-2T

Vehicle Wheel & Axle WeighingPad

Vehicle Wheel & Axle Weighing Pad

Aluminum-alloy; Ultra thin weighpad design; Light-weighted, portable; Slope can be mounted or unmounted; 5 digits LED display; Larger weigh-pad size to suit different vehicles; This product
is mainly used to measure the weight of wheel & axle (when two weigh-pads are used) of
vehicles statically to help adjust the wheel & axle accurately.
One IN-1DY-2T can statically or dynamically measure wheel weight,so double can be parallelly
connected to measure axle weight. CZ-1DY(2t) is widely used in measuring the weight of
motorcar,autocar and little electrical bicycle.

Vehicle Wheel & Axle Weighing Pad

Rated load: 2(t)
Static error (%F.S):0.2
Static comprehensive error(%F.S): 0.1~0.5	Insulation resistance(MΩ): ≥5000(100VDC)
Indicato use temp. range(ºC): 0~+50	Compensated temp.range(ºC): 0~+50
Rated output(mV/V): 1.0±0.1	Use temp.range(ºC): -30~+80
Non-linearity(%F.S): 0.2	Temp.effect on zero(F.S/10ºC): 0.03
Error on corners(%F.S): 0.2	Temp.effect on span(F.S/10ºC): 0.05
repeatability (%F.S): 0.05	Safe overload(%): 120
Zero balance(%F.S): ±1	Ultimate overload(%): 150
Excitation voltage(VDC): 9~15	Net weight (kg): 10
Recommended voltage(V): 10	Defend grade: IP66

Vehicle Wheel & Axle Weighing Pad

Weigh Module IN-363M1

* IN363M1 tension and compression weigh module, use short length and high beam,

* Good rigidity,

* Strong lateral force resistance

* Output up to 4mv/v, have overload limite lock.

* Glue sealed or welded.

* IP67 Protection

200kg 500kg Mini Load Cell Force Sensor IN-MI-040

Mini Force Sensor IN-MI-040

Force measurement in small space installation, such as feeling tester for keyboard switch,
compression force measurement for hot and cold lamination machine,
and grasping force measurement for robotic hands

Froce Sensor Dimension:

COMPRESSION LOAD CELL IN-RC3

     

Specifications of  IN-RC3 COMPRESSION LOAD CELL : +Exc -Red, +Sig-grn, -Exc-Blk, -Sig- Wht 

Item	Unit	Parameter
Accuracy class to OIML R60		C2	C3
Rated capacity (Emax)		5,10,20,30
Minimum LC verification interval (Vmin)	%ofEmax	0.0200	0.0100
Sensitivity (Cn) I Zero balance	mV/V	2.0±0.002/0±0.02
Temperature effect on zero balance (TKo)	% ofCn/10K	± 0.02	± 0.0170
Temperature effect on sensitivity (TKc)	% ofCn/10K	± 0.02	± 0.0170
Hysteresis error (dhy)	%ofCn	± 0.0270	± 0.0180
Non-linearity(dlin)	%ofCn	±0.0250	± 0.0167
Cep(dcr) over 30 min.	%ofCn	± 0.030	± 0.0167
Input (RLC) &Output resistance (Ro)		IN-RC3:400±10&352±3 IN-RC3Y:700 ±20 &706 ±7
Nominal range of excitation voltage (Bu)	V	5---15
Insulation resistance (Ris) at 50Vdc	MQ	>=5000
Service temperature range (Btu)	ºC	-30...+70
Safe load limit (EL) & Breaking 10ad(Ed)	%ofEmax	150 &250
Protection class according to EN 60 529 (IEC 529)		IP68
Material :Measuring element+housing		Stainless or alloy steel +Stainless steel

Maximum capacity(Emax)		5t	10t	20t	30t
Min. scale verification (emin) according to EN45501[...#=max. Number of load cells]	kg	2 [4#]	5 [6#]	5 [6#]	10 [10#]
Deflection at Emax (snom) ,approx	mm	0.55	0.55	0.65	0.75
Weight(G) ,approx	kg	1.8	1.9	2.1	2.3
Cable : Diameter: Ø 6mm Length	m	8	10	12	15

Dynamic Wireless Portable Axle Truck Vehicle Scale With 2 Weighing Pad IN-PT011-2

INPT011 wireless Portable wheel & axle weighing system
Dynamic Comprehensive Error(%F.S)	3 (5~10km/h)	Static Comprehensive Error(%F.S)	0.3
Parts	2 pcs wireless weighing pads	1 pc wireless weighing indicator	Charger, print paper, colored tape
Capacity	Wheel Weight: ≤10,15,20T	Axle Weight: ≤20,30,40T	Total Weight: ≤1000T(≤18 axle)
Defend Grade	Weighing Pad: IP66: Indicator: IP65
Product Weight	Weighing Pad: 35Kg /pcs; Indicator: 8Kg/pcs
Deposit	Temp. range: -30～+80℃; Relative Humidity＜90%RH
Product Size	Effective Weighing Area: 900×500×22.5mm; Indicator Size: 148×310×330mm
Digitization menu,easy operation
RS232 port is used to communicate with PC
Floating technology is adopted to remove zero drift
Ultra-high frequency ensures better anti-electromagnet ability
Vehicle axle weight is measured axle by axle, and the max number is unlimited
Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization
AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off

Parts:

1. PT-40H

Aluminum-alloy; Ultra-thin weighpad design: Easily mounted/unmounted slope; Hermetically sealed, suits different environment; Works both dynamically and statically; Can be used to measure axle weight and whole vehicle weight when two or four weigh-padsare connected together.

  

Rated Load(t/axle)	10, 20, 40	Repeatariy(%F.S)	0.05
Dynamic Error (%F.S)	3 (5~10km/h)	Zero Balance(%F.S)	±1
Static Error (%F.S)	0.1~0.3	Excitation Voltage(VDC)	9~15
Static Comprehensive Error(%F.S)	0.1~0.5	Recommended Voltage(V)	10
Insulation Resistance(MΩ)	≥5000(100VDC)	Use Temp. Range(℃)	-30~+80
Dynamic Comprehensive Error(%F.S)	1.5 (1~5km/h) 3 (5~10km/h)	Temp. Effect on Zero(F.S/10℃)	0.03
Compensated Temp. Range(℃)	-10~+50	Temp. Effect on Span(F.S/10℃)	0.05
Rated Output(mV/V)	1.0±0.1	Safe Overload (%)	120
Non-Linearity(%F.S)	0.2	Net Weight(kg)	45
Error On Corners(%F.S)	0.2	Defend Grade	IP66

2. Wireless Weighing Indicator

 

Features

Excellent weighing function and high precision

Touch screen LCD Monitor

Backlight lattice LCD, Clear both in daytime and nighttime

Digital wireless technology is adopted, so the portability is largely increased

Ultra-high frequency ensures better anti-electromagnet ability

Double LCDs are used

Measure and display vehicle velocity(km/h)

Floating technology is adopted to remove zero drift

Numbered options

Vehicle axle weight is measured axle by axle, and the max number is unlimited

Wireless transmission removes cable connection

Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization

RS232 port is used to communicate with PC

Can conveniently input full vehicle license number with letters

Can put in the name of the testing organization and operators

Can store as many as 10000 vehicle testing records

Mature inquiry and statistic function

AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off

The auto power supply system can be used for providing electricity and charging

The instrument can work independently. And it also can upload testing data to computers

Main Technical Index
full-scale temperature coefficient	5ppm/℃	impulse source of sensor	DC 5V±2%
inner resolution	24 bits	the speed of display renewal	12.5times/sec
Sampling speed	200 times/sec	system non-linearity	＜0.01%
operating temperature range		0℃--40℃
Power supply sink (without the sensor)		70mA(no printing and no back lighting), 1000mA(printing)
power supply		built-in 8.4V/20AH leading acid accumulator, and can connect with DC source (8.4V/3A)