2017年6月30日星期五

IN-C16 25t30t40t C3 Canister Rocker Pin Load Cell For Truck Scale

IN-C16 25t30t40t C3 Canister Rocker Pin Load Cell For Truck Scale



IN-C16 Self-restoring Rocker pinload cell
----Interchangeable with HBM C16,KELI ZSFY-30T LOAD CELL
-Self-restoring function
-Simple to Install-Laser welded,
IP68-Optimized for parallel connection by cornerpre-adjustment
-Application: Truck scale or other compression weighing devices

ItemUNITTECHNICAL DATA
Rated capacity (Emax)t10,15,20,25,30,40,,50
Accuracy classC3
Output(cn)/Zero Balance/mV/V2.0 ±0.02 /0±0.02
Minimum LC verification interval (Vmin)% of  Emax0.01
Creep over 30min% of Cn0.02
Temperature effect on zero% of Cn/10K0.02
Temperature effect on output% of Cn/10K0.02
Hysteresis% of  Cn0.017
Linearity deviation% of  Cn0.017
Repeatability% of  Cn0.017
Service temperature range-30 to +70
Limit load & Break load% of  EMax.120 /150
Nominal excitationV5~12
Input resistance & Output resistance      Ω700±20 & 703±20
Insulation resistanceM>5000
Cable length: diameter :Ø6mmM14
Cable type4 conductors, Braid Shielded, Black PVC Jacket
Color code:+Exc -Red, +Sig-grn, -Exc-Blk, -Sig- Wht
Construction material:stainless steel / alloy steel
Protection class to IEC529Ip68

2017年6月29日星期四

Weighing Controller IN-420-2L


Interchangeable With ATRAX 420 PLUS  INDICATOR

  • RS485/RS232 signal output                                                                                                
  • 3 Optical coupler RELAYS or 4-20mA (Can set both current and weight value of 4-20mA)
Special Function
  • Isolated
  • high anti-Anti-jamming

Weight Controller Function:
• Auto zero scale       • Auto zero tracking      • Normal weighing
• Peak    • Counting      • Zero scale              • Gross/Net        
• Tare      • RS-232C       • RS-485


Has an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles
per second and drives up to eight 350Ω or sixteen 700Ω load cells.
COMPLY WITH STANDARD OF NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000.
  • COMPLY WITH STANDARD OF NTEP III/IIIL, 10 000 
  • COMPLY WITH STANDARD OF Measurement Canada III, 10 000; III HD 20 000
  • Material: Iron
  • LED 6-digit display
  • Power Supply: AC adaptor, 100-240VAC, 50-60Hz
  • Parameter and calibration settings are performed on the front panel
  • LABRADOR computer software for parameter and calibration settings
  • Units of Measurement: kg, lb
  • Improper operation and fault indication
  • Two way relay signal output
  • Equipped with RS-232 and RS-485 connecting ports
  • Print functions with programmable print format
  • Built-in clock
Weight Controlloer Data

Enclosure MaterialIron
Units of Measurementkg, lb
Working Humidity≤90% RH
Working Temperature-10°C to 40°C/14°F to 104°F
Dimensions (mm)226mm x 71mm x 161mm
Dimensions (in)8.9in x 3.7in x 6.34in
Display TypeLCD
Display Digits6 digits
Digit Height25.4mm/1in
Display Dimensions143mm x 41mm/5.6in x 1.6in
Power SupplyAC adaptor, 100-240VAC, 50-60Hz
IP Rating
IP66
  
Division1, 2, 5, 10
Tare Range100% of Cn
Maximum Number of Load Cells8×350Ω or 16×700Ω
Maximum Power Consumption6VA
Excitation Voltage5VDC ± 5%
Fusible Link Fuse (slow blow)1A
Communications InterfaceRS-232C, RS-485
Print InterfaceSerial interface

2017年6月27日星期二

Vehicle Wheel & Axle Weighing Pad IN-1DY-2T

Vehicle Wheel & Axle WeighingPad



Vehicle Wheel & Axle Weighing Pad


Aluminum-alloy; Ultra thin weighpad design; Light-weighted, portable; Slope can be mounted or unmounted; 5 digits LED display; Larger weigh-pad size to suit different vehicles; This product
is mainly used to measure the weight of wheel & axle (when two weigh-pads are used) of
vehicles statically to help adjust the wheel & axle accurately.
One IN-1DY-2T can statically or dynamically measure wheel weight,so double can be parallelly
connected to measure axle weight. CZ-1DY(2t) is widely used in measuring the weight of
motorcar,autocar and little electrical bicycle.

Vehicle Wheel & Axle Weighing Pad


Rated load: 2(t)
Static error (%F.S):0.2
Static comprehensive error(%F.S): 0.1~0.5Insulation resistance(MΩ): ≥5000(100VDC)
Indicato use temp. range(ºC): 0~+50Compensated temp.range(ºC): 0~+50
Rated output(mV/V): 1.0±0.1Use temp.range(ºC): -30~+80
Non-linearity(%F.S): 0.2Temp.effect on zero(F.S/10ºC): 0.03
Error on corners(%F.S): 0.2Temp.effect on span(F.S/10ºC): 0.05
repeatability (%F.S): 0.05Safe overload(%): 120
Zero balance(%F.S): ±1Ultimate overload(%): 150
Excitation voltage(VDC): 9~15Net weight (kg): 10
Recommended voltage(V): 10Defend grade: IP66

Vehicle Wheel & Axle Weighing Pad


2017年6月26日星期一

Weigh Module IN-363M1



Weigh Module IN-363M1

* IN363M1 tension and compression weigh module, use short length and high beam,
* Good rigidity,
* Strong lateral force resistance
* Output up to 4mv/v, have overload limite lock.
* Glue sealed or welded.
* IP67 Protection


2017年6月20日星期二

200kg 500kg Mini Load Cell Force Sensor IN-MI-040

Mini Force Sensor IN-MI-040

Mini Force Sensor
Force measurement in small space installation, such as feeling tester for keyboard switch,
compression force
 measurement for hot and cold lamination machine,
and grasping force measurement for robotic hands


Froce Sensor Dimension:
Mini Force Sensor IN-MI-040

COMPRESSION LOAD CELL IN-RC3

COMPRESSION LOAD CELL IN-RC3



 COMPRESSION LOAD CELL IN-RC3    COMPRESSION LOAD CELL

Specifications of  IN-RC3 COMPRESSION LOAD CELL : +Exc -Red, +Sig-grn, -Exc-Blk, -Sig- Wht 

ItemUnitParameter
Accuracy class to OIML R60 C2C3
Rated capacity (Emax) 5,10,20,30
Minimum LC verification interval (Vmin)%ofEmax0.02000.0100
Sensitivity (Cn) Zero balancemV/V2.0±0.002/0±0.02
Temperature effect on zero balance (TKo)% ofCn/10K± 0.02± 0.0170
Temperature effect on sensitivity (TKc)
% ofCn/10K
± 0.02± 0.0170
Hysteresis error (dhy)%ofCn± 0.0270± 0.0180
Non-linearity(dlin)%ofCn±0.0250± 0.0167
Cep(dcr) over 30 min.%ofCn± 0.030± 0.0167

Input (RLC) &Output resistance (Ro)

 
IN-RC3:400±10&352±3
IN-RC3Y:700 ±20 &706 ±7
Nominal range of excitation voltage (Bu)V5---15
Insulation resistance (Ris) at 50VdcMQ>=5000
Service temperature range (Btu)ºC-30...+70
Safe load limit (EL) & Breaking 10ad(Ed)%ofEmax150 &250
Protection class according to EN 60 529 (IEC 529) IP68
Material :Measuring element+housing Stainless or alloy steel +Stainless steel

Maximum capacity(Emax) 5t10t20t30t
Min. scale verification (emin) according to EN45501[...#=max. Number of load cells]
kg

2
[4#]

5
[6#]

5
[6#]

10
[10#]
Deflection at Emax (snom) ,approxmm0.550.550.650.75
Weight(G) ,approxkg1.81.92.12.3
Cable DiameterØ 6mm Lengthm8101215

2017年6月19日星期一

Dynamic Wireless Portable Axle Truck Vehicle Scale With 2 Weighing Pad IN-PT011-2

INPT011 wireless Portable wheel & axle weighing system
Dynamic Comprehensive Error(%F.S)3 (5~10km/h)Static Comprehensive Error(%F.S)0.3
Parts2 pcs wireless weighing pads1 pc wireless weighing indicatorCharger, print paper, colored tape
CapacityWheel Weight: ≤10,15,20TAxle Weight: ≤20,30,40TTotal Weight: ≤1000T(≤18 axle)
Defend GradeWeighing Pad: IP66: Indicator: IP65
Product WeightWeighing Pad: 35Kg /pcs; Indicator: 8Kg/pcs
DepositTemp. range: -30~+80℃; Relative Humidity<90%RH
Product SizeEffective Weighing Area: 900×500×22.5mm; Indicator Size: 148×310×330mm
Digitization menu,easy operation
RS232 port is used to communicate with PC
Floating technology is adopted to remove zero drift
Ultra-high frequency ensures better anti-electromagnet ability
Vehicle axle weight is measured axle by axle, and the max number is unlimited
Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization
AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off


Parts:
1. PT-40H
Aluminum-alloy; Ultra-thin weighpad design: Easily mounted/unmounted slope; Hermetically sealed, suits different environment; Works both dynamically and statically; Can be used to measure axle weight and whole vehicle weight when two or four weigh-padsare connected together.
portable axle truck scale  Wireless Portable Dynamic Axle Truck Scale - INPT011

Rated Load(t/axle)10, 20, 40Repeatariy(%F.S)0.05
Dynamic Error (%F.S)3 (5~10km/h)Zero Balance(%F.S)±1
Static Error (%F.S)0.1~0.3Excitation Voltage(VDC)9~15
Static Comprehensive Error(%F.S)0.1~0.5Recommended Voltage(V)10
Insulation Resistance(MΩ)≥5000(100VDC)Use Temp. Range(℃)-30~+80
Dynamic Comprehensive Error(%F.S)1.5 (1~5km/h) 3 (5~10km/h)Temp. Effect on Zero(F.S/10℃)0.03
Compensated Temp. Range(℃)-10~+50Temp. Effect on Span(F.S/10℃)0.05
Rated Output(mV/V)1.0±0.1Safe Overload (%)120
Non-Linearity(%F.S)0.2Net Weight(kg)45
Error On Corners(%F.S)0.2Defend GradeIP66




2. Wireless Weighing Indicator

Wireless Portable Dynamic Axle Truck Scale - INPT011 Wireless Portable Dynamic Axle Truck Scale - INPT011


Features
Excellent weighing function and high precision
Touch screen LCD Monitor
Backlight lattice LCD, Clear both in daytime and nighttime
Digital wireless technology is adopted, so the portability is largely increased
Ultra-high frequency ensures better anti-electromagnet ability
Double LCDs are used
Measure and display vehicle velocity(km/h)
Floating technology is adopted to remove zero drift
Numbered options
Vehicle axle weight is measured axle by axle, and the max number is unlimited
Wireless transmission removes cable connection
Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization
RS232 port is used to communicate with PC
Can conveniently input full vehicle license number with letters
Can put in the name of the testing organization and operators
Can store as many as 10000 vehicle testing records
Mature inquiry and statistic function
AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off
The auto power supply system can be used for providing electricity and charging
The instrument can work independently. And it also can upload testing data to computers

Main Technical Index
full-scale temperature coefficient5ppm/℃impulse source of sensorDC 5V±2%
inner resolution24 bitsthe speed of display renewal12.5times/sec
Sampling speed200 times/secsystem non-linearity<0.01%
operating temperature range0℃--40℃
Power supply sink (without the sensor)70mA(no printing and no back lighting), 1000mA(printing)
power supplybuilt-in 8.4V/20AH leading acid accumulator, and can connect with DC source (8.4V/3A)

2017年6月16日星期五

Replace 30t Canister Mettler Toledo Load Cell for Truck Scale-IN-GD



Replace 30t canister mettler toledo load cell for truck scale-IN-GD

Self-restoring rocker pin load cell
Suitable for Truck scale, railway scale, axle wheel scale, floor scale

Load Cell Special Features:
   Self-restoring function
   Nominalloads:10t-50t Simple to install
   Laser welded ,IP68
   Optimized for parallel connection by comer pre-adjustment
   Meets EMC/ESD  requirements According to EN 45 501
Replace 30t Canister Mettler Toledo Load Cell for Truck Scale-IN-GDReplace 30t Canister Mettler Toledo Load Cell for Truck Scale-IN-GDReplace 30t Canister Mettler Toledo Load Cell for Truck Scale-IN-GD
Load Cell Technical datas:
 
ItemUnitParameter
Accuracy Class to OIML R60 C2C3
Maximum Capacity (Emax)t10, 20, 30, 40, 50
Minimum LC Verification Interval (Vmin)% of Emax0.02000.0100
Sensitivity(Cn) / Zero BalancemV/V2.0±0.002/0±0.02
Temperature Effect on Zero Balance (TKo)% of Cn/10K±0.02±0.0170
Temperature Effect on sensitivity (TKc)% of Cn/10K±0.02±0.0170
Hysteresis Error (dhy)% of Cn±0.0270±0.0180
Non-linearity (din)% of Cn±0.0250±0.0167
Creep (dcr) Over 30 min.% of Cn±0.030±0.0167
Input (RLC) & Output Resistance (Ro)Ω1160±10&1000±3
Nominal Range of Excitation Voltage (Bu)V5-12
Insulation Resistance (Ris) at 50 Vdc≥5000
Service Temperature Range (Btu)-30…+70
Safe Load Limit (EL) & Breaking Load (Ed)% of Emax150 & 200
Protection Class According to EN 60 529 (IEC 529) IP68
Material: measuring element + housing Stainless or Alloy Steel + Stainless Steel
Maximum Capacity (Emax)t1020304050
Min. scale Verification (emin) according to En45 501
[...#=max. Number of Load Cells]

Kg
5
[6#]
5
[6#]
10
[8#]
10
[8#]
10
[6#]
20
[8#]
10
[4#]
20
[10#]
Recommended Maximum Weighing Capacity of ScaleT30
50
80
100
100
150
100
200
Deflection at Emax (snom), approx.Mm0.550.650.750.850.85
Weight(G), approx.Kg1.92.12.32.52.7
Cable: Diameter: φ6mm Lengthm1212141616

 

2017年6月15日星期四

IN-100-1 Four-channels Static Portable Car/Vehicle Weighing System

IN-100-1 Four-channels Static Portable Car/Vehicle Weighing System


Portable truck scale Features:

Stable test results – nearly test results in the repeattesting for one axle
Canstore as many as 10000 vehicle testing records;
Fourchannels that can be connected to Four weighing pad and develop to be static weighing,display four wheel weight, each axle weight and gross weight

WEIGH PAD
Stable test results – nearly test results in the repeat testing for one axle
Can store as many as 10000 vehicle testing records;
Four channels that can be connected to Four weighing pad and develop to be static weighing,display four wheel weight,,each axle weight and gross weight
Dispay uints: kg
Max load per platform 2000 kg, total load per 4 platforms 8000 kg
4 connectors to link the 4 plaforms
Precision: 0.1-0.3%FS
power supply: built-in 6V/10AH leading acid accumulator, and can connect with DC source (7.5V/3A or 12V/3A)
parts:
4pcs portable weighing pads
8pcs slope
Four channels-Static weighing indicator
RS232 port is used to communicate with PC and printer

Four channels-Static weighing indicator

size: 400mm X 300mm X 180 mm
netweight: 8KG
material: ABS structural foam
weighing pads
size: 405 mm(L) X 345mm(W)X 15mm(H)
netweight:8KG/pcs
materials: High strength Aluminum alloy
slope
size: 405mm (L) X 100mm(W) X 15(H) mm
netweight: 3 KG/pcs
materials: High strength Aluminum alloy
Parts::
CZ-100 weighing pad(The weighing pad’s model can be changed according to customer’s request)

IN-100-1 Four-channels Static Portable Car/Vehicle Weighing System

Four-channels Static Portable Car/Vehicle Weighing System FEATURES:
Aluminum-alloy; Ultra thin weighpad design; Easily mounted / unmounted slope; Hermetically sealed, suits different environment; Works both dynamically and statically; Can be used to measure axle weight and whole vehicle weight when four weigh-pads are connected together.


PARAMETER

Rated load: 500kg,1t,2t
Static comprehensive error(%F.S): 0.1-0.3
Rated output(mV/V): 1.0±0.1Insulation resistance(MΩ): ≥5000(100VDC)
Non-linearity(%F.S): 0.2Compensated temp.range(℃): -10~+50
Error on corners(%F.S): 0.2Use temp.range(℃): -30~+80
Repeatariy(%F.S): 0.05Temp.effect on zero(F.S/10℃): 0.03
Zero balance(%F.S): ±1Temp.effect on span(F.S/10℃): 0.05
Excitation voltage(VDC): 9~15Safe overload(%): 120
Recommended voltage(V): 10Ultimate overload(%): 150
Defend grade: IP66Netweight(kg): 8