Gravimetric feeder/loss-in-weigh feeder for Batching scale

 

Gravimetric feeder/loss-in-weigh feeder for Batching scale

Application: Batching scale

Accuracy up to 0.3g 

Single Screw Loss-in-weight Metering Feeder product is widely applied in the filed of plastic,

rubber, chemical, food, pharmaceutical industry, etc.

1). Generous and beautiful appearance;

2). Small volume;

3). Wide measuring range;

4). Touchscreen output and customized input system designed for easy operation;

5). Low noise;

6). High stability;

7). Easy to clean and maintain;

8). Excellent control system

Digital Junction Box-DJ04-2 with Modbus

Digital junction box with RS485 output +modbus

The digital junction box is based on resistance strain sensor as signal source, 

It is composed of 24bits Σ-Δ type A/D conversion technology and The 8 bit single chip microcomputer etc.large-scale integrated circuit. 

It is with high accuracy, high reliability. 

Main functions:

¨ panel keyboard settings, capacity calibration

¨ Has function to display weight setting. 

¨ Can point out failures, operational error.

¨ RS485 output,Can set the corresponding weight value of 4mA and 20mA.

Digital Weight Indicator for Truck Scale

          DX05 DIGITAL WEIGHING TERMINAL

                         ---Best Choice for Truck Scale, Floor Scale, Axle load scale, etc.

                              

1. Description

DX05 is a digital weighing terminal, which has stable quality, powerful function and easy operation.

It can be connected to various types of load cell. If DX05 – A/D module has been installed.

With the industry-leading auto addressing technology and auto correction angle technology,

DX05 facilitate users to debug more easily.

1. Application

Best choice for Truck scale and Floor scale, Axle load scale, etc.

1. Reliability

100-260V, wide range of input voltage, high efficiency switching power supply;

Short circuit and overload protection in the input connector of the load cell

Built-in battery has a constant current and voltage float, have over-discharge protection,

ensure the battery life of 3-5 years;

Serial data interface with ESD protection

The communication of digital load cell adopt two-password protected, has strong anti-cheating function.

Can be connected to infrared to prevent cheating by press the side (optional);

Weighing Indicator

Weighing indicator IN-650D

Interchangeable with 

INDICATOR OF PT650D

weighing indicator Especially for batching scale

main features:

¨ The panel keyboard is available for setting parameters and calibration span.

¨ Functions of displaying weight and zero setting

¨ Reminding for instrument failure and errors in operation

¨ 4~20mA analog output,it is available to set the corresponding weight of current output of 

   0mA and 20mA.

¨ The fixed value of low,median and high can control output and be available to set respective 

control value and buffer value arbitrarily.

¨ RS232 output

-weighing indicator Especially for batching scale

Main Technical Parameters

¨ 2.1 A/D sampling rate:  7.5 Times/s~240Times/s optional

¨ 2.2 Internal resolution:  24bits

¨ 2.3 Non-linearity:  ≤0.005%F.S

¨ 2.4 Zero drift:  ≤0.2μV/℃

¨ 2.5 Temperature coefficient of capacity:   ≤10ppm/℃

¨ 2.6 Net input signal range of full capacity:   2~20mV

¨ 2.7 Initial weight signal range: -1~+9mV

¨ 2.8 Analog input signal sensitivity:0.5uV /d(Minimum)

          1.5uV/d(Recommended)

¨ 2.9 Zeroing range: 100%FS

¨ 2.11 Display: 6 red LED digital tubes(height of word is 14mm

¨ 2.14 Amibent temperature of operation: -5℃~ 45℃

¨ 2.15 Relative humidity: ≯ 90%(Non condensing)

¨ 2.16 Power supply: +18 ~ +24 VDC,0.5A

2.17 Sensor bridge excitation: DC 5V,avaiable to connect 4 load cells of 350 ohms or 12 load cells of 750 ohms.  

Weighing indicator

Weighing indicator IN-420PLUS

Interchangeable with 

INDICATOR OF ATRAX 420 PLUS

FUNCTION:

• Auto zero scale       • Auto zero tracking      • Normal weighing

• Peak    • Counting      • Zero scale              • Gross/Net        
• Tare      • RS-232C       • RS-485              • Print interface (PS805 Printer)

Has an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles

per second and drives up to eight 350Ω or sixteen 700Ω load cells.

With a SS304 stainless steel wash down enclosure is ideal for the food industry, agricultural industry, and industrial applications

and COMPLY WITH STANDARD OF NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000.

• COMPLY WITH STANDARD OF NTEP III/IIIL, 10 000 
• COMPLY WITH STANDARD OF  Measurement Canada III, 10 000; III HD 20 000
• Material: Stainless steel SS304
• IP Rating: IP66
• LED 6-digit display
• Power Supply: AC adaptor, 100-240VAC, 50-60Hz
• Parameter and calibration settings are performed on the front panel
• LABRADOR computer software for parameter and calibration settings
• Units of Measurement: kg, lb
• Improper operation and fault indication
• Two way relay signal output
• Equipped with RS-232 and RS-485 connecting ports
• Print functions with programmable print format
• Built-in clock

Static Charging Bar - DCB Series

 

Static charging bar - DCB Series

Working Principle

When an object with a static close to another non-static object, due to electrostatic induction,

non-static object inside which is close to static object will gather the opposite charges relative

to the charges of static object (the other side to carry produce the same number of same polarity charge),

it will show "electrostatic adsorption" phenomenon because that opposite charges attract each other.

30KV Charging Generator - DC503 (Case type)

DC503 (Case type) 30KV Charging Generator

Introduce

DC506 case type charging generator is a kind of static application equipment.

The static charging generator is composed of a static emitter (bar) and a DC high voltage power supply.

For DC high voltage power supply, provide plasma launcher(bar) of negative (or positive) high voltage,

to emit negative ions (or positive ions) and then add electronic charge(artificial charge) on an object (workpiece).

The higher the voltage, the greater the effective range. It is widely used in non-woven fabric, film, painting, printing,

flocking, sorting and biological engineering fields. It have many advantages like simple installation,

fire protection, no electric shock and stable work.

60KV Charging Generator

DC506 (Case type) 60KV Charging Generator

Introduce

DC506 case type charging generator is a kind of static application equipment.

The static charging generator is composed of a static emitter (bar) and a DC high voltage power supply.

For DC high voltage power supply, provide plasma launcher(bar) of negative (or positive) high voltage,

to emit negative ions (or positive ions) and then add electronic charge(artificial charge) on an object (workpiece).

The higher the voltage, the greater the effective range. It is widely used in non-woven fabric, film, painting, printing,

flocking, sorting and biological engineering fields. It have many advantages like simple installation,

fire protection, no electric shock and stable work.

20KV Charging Generator

 

20KV Charging Generator- DC302

 

Technical Specifications

Model	DC302	DC303
Input Voltage	100V～240VAC	100V～240VAC
Output Voltage	0-20kv Adjustable	0-30kv Adjustable
Max Output Current	5mA	5mA
Max Output Power	100W	150W
Output Polarity	- Negative/+ Positive	- Negative/+ Positive
Working Temperature	-15℃～50℃	-15℃～50℃
Output Stability	Max Load 1％	Max Load 1％
Output	20KV*2	30KV*2
Size	213*154*74mm	213*154*74mm
Weight	2.2kg	2.2kg

Installation and Fixation

Install the host in the right place	According to own needs to choose the installation location
Ground the host correctly	Fixed the high pressure generator in need position
Connect the high voltage output line with the static generator system	Connect the output end of the power adapter to the power input
Connect power adapter to power supply

Setting

                         Control Panel

(1) OFF:Turn off NO:Turn on	(2) Output polarity N: Negative P:Positive
(3) Current gear/Top gear(Maximum 16 gears)	(4) Real-time voltage display
(5) Alarm indicator light: Ground and high pressure alarm(The indicator light is always on.)	(6) System switch
(7) Increase output voltage	(8) Decrease output voltage
(9) Infrared receiver

30KV Charging Generator

30KV Charging Generator- DC303

 

Technical Specifications

Model	DC302	DC303
Input Voltage	100V～240VAC	100V～240VAC
Output Voltage	0-20kv Adjustable	0-30kv Adjustable
Max Output Current	5mA	5mA
Max Output Power	100W	150W
Output Polarity	- Negative/+ Positive	- Negative/+ Positive
Working Temperature	-15℃～50℃	-15℃～50℃
Output Stability	Max Load 1％	Max Load 1％
Output	20KV*2	30KV*2
Size	213*154*74mm	213*154*74mm
Weight	2.2kg	2.2kg

Installation and Fixation

Install the host in the right place	According to own needs to choose the installation location
Ground the host correctly	Fixed the high pressure generator in need position
Connect the high voltage output line with the static generator system	Connect the output end of the power adapter to the power input
Connect power adapter to power supply

Setting

                         Control Panel

(1) OFF:Turn off NO:Turn on	(2) Output polarity N: Negative P:Positive
(3) Current gear/Top gear(Maximum 16 gears)	(4) Real-time voltage display
(5) Alarm indicator light: Ground and high pressure alarm(The indicator light is always on.)	(6) System switch
(7) Increase output voltage	(8) Decrease output voltage
(9) Infrared receiver

http://www.innovation-electronic.com/sale-8045188-in-c16d-digital-column-load-cell-for-truck-scale.html

Column load cell

 

Stable quality in the long term.

 

Load cell Suitable for truck scale

 

Interchangeable with HBM LOAD CELL MODEL C16

 

Output: RS485, Modbus available.

China wholesale WF-BS Waterproof Bench Scale m

China wholesale WF-BS Waterproof Bench Scale

1).  Completely 304 stainless steel structure, With stainless steel waterproof protection. Stainless steel fixed foot or black rubber foot is optional.

2).  It is well used in damp or harsh environment, such as meat or fish processing plant, pharmaceutical and chemical industries.

3).  304 Stainless steel rectangular top cover or round corner top cover.

4).  With bracket (304 stainless steel) and column (Φ38mm stainless-steel tube) for the indicator

5).  With the special column for waterproof indicator.

6).  Optional Zemic OIML load cells or KELI load cell

Weighing System for Loader

Weighing system for Loader

Model No.:WS-LD011

Android loader scale

System Characteristic:

Integration:

The weighing system for loader is integration in an industrial intelligent weighing instrument,

both have the convenience of instrument, and have the high performance of industrial computer,

it can achieve the voice and video calls, reversing monitor, send and share weighing data functions

Extensibility:

It can achieve data teletransmission with GMS card or Wifi Module.

Rela-time position, can replay the trace.

It can also extend to compatible with comprise ERP management system

High efficiency:

The Weighing system for loader have high efficiency, the goods name,

reilway wagon/freighter number can beedited randomly, input or import work target in advance.

the system can accumulate the target weighing automatically, alarm function and so on.

Automation:

Weighing, record, save,long-distance transmissio, print, summarizing and so on, the series pipelline operate,

the data can be generated reportpie chart, bar chart and so on.

High security:

Easy operation, High accuracy, ensure safety measurement, integrated circuit, low failure rate, high reliability.

Weighing indicator for truck scale

Weighing Indicator for Truck Scale IN-B10E

 

  Main Features

◆ AC and DC Power, when equipped with 6 v battery, without the ac power input can also weigh 

    and print as normal

◆ Options for automatic zero or memory start when starting up it

◆ Automatic zero point tracking

◆ Under load alarming and overload warning

◆ Calibration of capacity with keyboard

◆ Non-linearity calibration, automatic dividing value switching

◆ Date, time, truck No., cargo No. setting

◆ Real-time calendar clock, with power-off protection

◆ With weighing situation of truck scale and platform scale. In truck scale weighing state, with single 

     weight mode, double weight mode and pure weight mode, three kinds of weight modes. 

     In platform scale weighing state, with automatic work mode and manual work mode

◆ 500 complete weighing data saving, preset tare weight of 400 different truck No.

◆ Check and print according to the weighing date,,truck No, cargo No.,or serial No.

◆ With micro printer, print demo,various weighing statements and preset tare weight tables, etc, 

     can program the content of weight demo

◆ External line printer, optional vertical and horizontal printing demo list, various weighing statements 

     and preset tare weighing tables, etc

◆ With interface of BCD code,can be connected to large screen display

◆ With function of RS232C and RS485,can be connected to a computer and composed a 

     microcomputer weighing system

Main Technical Parameters

       ◆ A/D sampling rate: 7.5 Times/s~60Times/s optional

       ◆ Accuracy class:  Ⅲ,n=3000

       ◆ Net input signal range of full capacity: 2~15mV

       ◆ Initial weight signal range:  -1~+9mV

       ◆ zero setting range: ±4%FS,±10%FS,±20%FS,±50%FS optional

       ◆ Service temperature range: 0~ 40℃

       ◆ Relative humidity:  ≯ 90%(Non condensing)

       ◆ Power supply:  AC 220V(–15%~ +10%)  50Hz±2%

       ◆ Sensor bridge excitation:  DC 5V , can connect 8 load cells of not less than 800W

       ◆ Equipped battery:  6V/4AH

       ◆DC insulation:   > 5 M W

       ◆Voltage-endurance:   AC 1500V(without breakdown in one minute)

       ◆AC leakage current of power frequency: < 3.5 mA

       ◆Outside dimension:   325mm ´210mm ´180mm

       ◆ Weight:  3.2 kg

       ◆Power consumption:  < 15W

Column Canister Compression Load Cell for Truck Scale

Column load cell

 

Stable quality in the long term.

 

LOAD CELL Suitable for truck scale

 

Interchangeable with HBM LOAD CELL MODEL C16

 

PCB for Weight Indicator-Yaohua T6

Weight Indicator Mainboard/PCB-Yaohua T6

This pcb for weight indicator -YAOHUA YH-T6

Weighing indicator XK3190-T6 is widely applied in electronic platform scale,

electronic floor scale and so on alike static weighing system equipped with 1~4 load cell.

Feature:
Low energy consumption design,wide voltage input
High precision Σ-Δ conversion,high PPR
Typical function, easy operation
AC/DC(built in rechargeable battery 6V/4AH) power supply , Auto power off at low battery

Digital Junction Box-DJ04-2 with Modbus

Digital junction box with RS485 output +modbus

The digital junction box is based on resistance strain sensor as signal source, 

It is composed of 24bits Σ-Δ type A/D conversion technology and The 8 bit single chip microcomputer etc.large-scale integrated circuit. 

It is with high accuracy, high reliability. 

Main functions:

¨ panel keyboard settings, capacity calibration

¨ Has function to display weight setting. 

¨ Can point out failures, operational error.

¨ RS485 output,Can set the corresponding weight value of 4mA and 20mA. 

Weight Transmitter

Weight Transmitter-ARS

Input: one analog load cell

Output: RS485/RS232/4-20mA

Single Point Load Cell

Single point load cell IN1004

Aluminum Load Cell

Creep precision up to 0.005%

Working video:https://youtu.be/5DuzXmzG-7Q

Interchangeable Products

• Vishay Tedea 1004 Load Cell

Share Beam Load Cell

Single beam load cell IN-3411

 

Interchangeable Products

 

Vishay-Tedea 3400 load cell

 

Tension and Compression Load Cell

Tension and compression load cell IN266

Alloy steel

Capacity from 1,000kg...300,000kg

S type load cell

INS011 S type load cell for tension and compression use

Capacity: 100kg 300kg 750kg 1000kg

Application: Crane scale, test machine

Truck scale

Middle dissected, with a top cover on the platform for access to the load cells

Specifications:

• Width available: 3m,3.2m,3.4m
• Usual length available: 6m,7m,8m,9m,10m,12m, 14m,16m,17.4m,18m,21m,24m
• Different max. capacity customized according to customer’s needs, max. can be up to 300t for special use.
• In one 40’ container, we can load 2 units of 18m or 2 units of the one less long than 18m.  

Standard M1 500kg Iron Cast SCALE TESTING CALIBRATION WEIGHTS

Standard M1 500kg Iron Cast SCALE TESTING CALIBRATION WEIGHTS

  # Load Cell # Truck Scale # Weight Tansmitter # Weight Indicator# Load Cell Amplifier # Weighing Scale # Bench Scale #Platform Scale # Floor Scale # Crane Scale # Static # Static Elimination  # Static Charging #Static Solution 

Digital Junction Box-DJ04-2 with Modbus

Digital junction box with RS485 output +modbus

The digital junction box is based on resistance strain sensor as signal source, 

It is composed of 24bits Σ-Δ type A/D conversion technology and The 8 bit single chip microcomputer etc.large-scale integrated circuit. 

It is with high accuracy, high reliability. 

Main functions:

¨ panel keyboard settings, capacity calibration

¨ Has function to display weight setting. 

¨ Can point out failures, operational error.

¨ RS485 output,Can set the corresponding weight value of 4mA and 20mA. 

Main Technical Parameters

1.  A/D sampling rate:  7.5 Times/s~240Times/s optional
2.  Internal resolution:  24bits
3.  Non-linearity:  ≤0.005%F.S
4.  Zero drift:  ≤0.2μV/℃
5.  Temperature coefficient of capacity:   ≤10ppm/℃
6.  Net input signal range of full capacity:   2~20mV
7.  Initial weight signal range: -1~+9mV
8.  Analog input signal sensitivity:0.5uV /d(Minimum)    1.5uV/d(Recommended)
9.  Zeroing range: 100%FS
10.  Display: 6 red LED digital tubes(height of word is 14mm
11.  Amibent temperature of operation: -5℃~ 45℃
12.  Relative humidity: ≯ 90%(Non condensing)
13.  Power supply: +18 ~ +26 VDC,0.5A
14. Sensor bridge excitation: DC 5V,can connect 6 load cells of 350 ohms or 12 load cells of 750 ohms.