Wireless Portable Dynamic Axle Truck Scale - INPT011

INPT011 wireless Portable wheel & axle weighing system
Dynamic Comprehensive Error(%F.S)	3 (5~10km/h)	Static Comprehensive Error(%F.S)	0.3
Parts	2 pcs wireless weighing pads	1 pc wireless weighing indicator	Charger, print paper, colored tape
Capacity	Wheel Weight: ≤10,15,20T	Axle Weight: ≤20,30,40T	Total Weight: ≤1000T(≤18 axle)
Defend Grade	Weighing Pad: IP66: Indicator: IP65
Product Weight	Weighing Pad: 35Kg /pcs; Indicator: 8Kg/pcs
Deposit	Temp. range: -30～+80℃; Relative Humidity＜90%RH
Product Size	Effective Weighing Area: 900×500×22.5mm; Indicator Size: 148×310×330mm
Digitization menu,easy operation
RS232 port is used to communicate with PC
Floating technology is adopted to remove zero drift
Ultra-high frequency ensures better anti-electromagnet ability
Vehicle axle weight is measured axle by axle, and the max number is unlimited
Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization
AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off

Parts:

1. PT-40H

Aluminum-alloy; Ultra-thin weighpad design: Easily mounted/unmounted slope; Hermetically sealed, suits different environment; Works both dynamically and statically; Can be used to measure axle weight and whole vehicle weight when two or four weigh-padsare connected together.

  

Rated Load(t/axle)	10, 20, 40	Repeatariy(%F.S)	0.05
Dynamic Error (%F.S)	3 (5~10km/h)	Zero Balance(%F.S)	±1
Static Error (%F.S)	0.1~0.3	Excitation Voltage(VDC)	9~15
Static Comprehensive Error(%F.S)	0.1~0.5	Recommended Voltage(V)	10
Insulation Resistance(MΩ)	≥5000(100VDC)	Use Temp. Range(℃)	-30~+80
Dynamic Comprehensive Error(%F.S)	1.5 (1~5km/h) 3 (5~10km/h)	Temp. Effect on Zero(F.S/10℃)	0.03
Compensated Temp. Range(℃)	-10~+50	Temp. Effect on Span(F.S/10℃)	0.05
Rated Output(mV/V)	1.0±0.1	Safe Overload (%)	120
Non-Linearity(%F.S)	0.2	Net Weight(kg)	45
Error On Corners(%F.S)	0.2	Defend Grade	IP66

2. Wireless Weighing Indicator

 

Features

Excellent weighing function and high precision

Touch screen LCD Monitor

Backlight lattice LCD, Clear both in daytime and nighttime

Digital wireless technology is adopted, so the portability is largely increased

Ultra-high frequency ensures better anti-electromagnet ability

Double LCDs are used

Measure and display vehicle velocity(km/h)

Floating technology is adopted to remove zero drift

Numbered options

Vehicle axle weight is measured axle by axle, and the max number is unlimited

Wireless transmission removes cable connection

Micro printer is embedded in the wireless instrument, the print ticket contains date, time, truck no, ticket no, axle weight, joint axle weight, truck weight, overload and executive organization

RS232 port is used to communicate with PC

Can conveniently input full vehicle license number with letters

Can put in the name of the testing organization and operators

Can store as many as 10000 vehicle testing records

Mature inquiry and statistic function

AC/DC, real time battery capacity indicating. The battery can be used for 40 hours on end. Automatic shut off

The auto power supply system can be used for providing electricity and charging

The instrument can work independently. And it also can upload testing data to computers

Main Technical Index
full-scale temperature coefficient	5ppm/℃	impulse source of sensor	DC 5V±2%
inner resolution	24 bits	the speed of display renewal	12.5times/sec
Sampling speed	200 times/sec	system non-linearity	＜0.01%
operating temperature range		0℃--40℃
Power supply sink (without the sensor)		70mA(no printing and no back lighting), 1000mA(printing)
power supply		built-in 8.4V/20AH leading acid accumulator, and can connect with DC source (8.4V/3A)

Load cell Amplifier Weight Transmitter-INA2PS

Load cell amplifier/Weight transmitter IN-A2PS

 

This Load cell amplifier/Weight transmitter Built-in 24 bits Σ-Δ integrated ADC chip for weighing conversion;
Full digital conversion, no potentiometer or any other analog conditioning components;
Analog output two-button calibration, it only needs calibrate once of zero and full.

1 Accuracy: 1/10000
2 Non-linearity: ≤0.008%F.S
3 Zero temperature drift: ≤0.4μV/℃
4 Temperature coefficient of span: ≤10ppm/℃
5 Net input range of full capacity: -30 mV ~ +30mV
6 Sensitivity of analog input signal: 0.5uV /d (Min.)
1.5uV/d (Recommend)
7 Calibration range: +- 50%FS
8 Display: No display
9 Working temperature: -30℃~ 60℃
10 Relative humidity: ≤ 90%(No condensation)
11 Power supply: +18 ~ +26VDC,>0.5A
12Load cell bridge voltage: DC 5V 1.5A Can max connect with 8 pieces of load cells whose impedance > 350Ω
13 Output optional: 0~5V,0~10V,4~20mA(DIP switch selection)

Load Cell Junction Box/Amplifier/Weight transmitter/Conversion-DJ04

Load Cell Junction Box/Amplifier/Weight transmitter/Conversion

The digital junction box is based on resistance strain sensor as signal source, It is composed of 24bits Σ-Δ type A/D conversion technology and The 8 bit single chip microcomputer etc.large-scale integrated circuit. 

It is with high accuracy, high reliability. 

Load Cell Junction Box/Amplifier/Weight transmitter/Conversion Main functions:

¨ panel keyboard settings, capacity calibration

¨ Has function to display weight setting. 

¨ Can point out failures, operational error.

¨ 4~20mA/RS485/RS232 output,Can set the corresponding weight value of 4mA and 20mA. 

Load Cell Junction Box/Amplifier/Weight transmitter/Conversion Main Technical Parameters

¨ 2.1 A/D sampling rate:  7.5 Times/s~240Times/s optional

¨ 2.2 Internal resolution:  24bits

¨ 2.3 Non-linearity:  ≤0.005%F.S

¨ 2.4 Zero drift:  ≤0.2μV/℃

¨ 2.5 Temperature coefficient of capacity:  ≤10ppm/℃

¨ 2.6 Net input signal range of full capacity:  2~20mV

¨ 2.7 Initial weight signal range: -1~+9mV

¨ 2.8 Analog input signal sensitivity:0.5uV /d(Minimum)

          1.5uV/d(Recommended)

¨ 2.9 Zeroing range: 100%FS

¨ 2.11 Display: 6 red LED digital tubes(height of word is 14mm

¨ 2.14 Amibent temperature of operation: -5℃~ 45℃

¨ 2.15 Relative humidity: ≯ 90%(Non condensing)

¨ 2.16 Power supply: +18 ~ +26 VDC,0.5A

        ¨2.17 Sensor bridge excitation:

DC 5V,can connect 6 load cells of 350 ohms or 12 load cells of 750 ohms.  

0.3G accuracy Gravimetric feeder/loss-in-weigh feeder for Batching scale-IN-GF

Gravimetric feeder/loss-in-weigh feeder for Batching scale

Application: Batching scale

Accuracy up to 0.3g 

Single Screw Loss-in-weight Metering Feeder product is widely applied in the filed of plastic,

rubber, chemical, food, pharmaceutical industry, etc.

1). Generous and beautiful appearance;

2). Small volume;

3). Wide measuring range;

4). Touchscreen output and customized input system designed for easy operation;

5). Low noise;

6). High stability;

7). Easy to clean and maintain;

8). Excellent control system

Single Point Load Cell - IN-PW10A

Replace HBM Single Point Load Cell - INPW-10A

Single Point Load Cell Dimensions:

Single Point Load Cell Technical Parameters:

Model	IN-PW10A-50KG, IN-PW10A-100KG, IN-PW10A-150KG,IN-PW10A-200KG, IN-PW10A-250KG,IN-PW10A-300KG,
Rated Capacity	50,100,150,200,250,300	KG
Rated Output	2.0±0.2	mV/V
Safe Overload	150	%R.C.
Maximum safe overload	300	%R.C.
Maximum safe side overload	300	%R.C.
Zero balance	±6	%R.O.
Non-linearity	0.0166(typ)	%R.O.
Hysteresis	0.0166(typ)	%R.O.
Compensated temperature range	-10 to +40	℃
Safe temperature range	-10 to +50	℃
Temperature effect on zero	0.0140(50/100/200kg), 0.0093(150/300kg), 0.0112(250kg)	%R.O./10K
Temperature effect on span	0.0175(+20 to +40℃), 0.00117(-10 to +20℃)	%R.O./10K
Input resistance	300 to 500	Ω
Output resistance	330 to 430	Ω
Recommended excitation voltage	1 to 12	V
Insulation resistance	2000 or more	MΩ
Degrees of protection	IN67
Cable	6 conductor shield cable 3m
Load cell material	Aluminum

S Type Load Cell - INS011

 

INS011 S Type Load Cell for Tension And Compression Use

Capacity: 100kg 300kg 750kg 1000kg

Application: Crane scale, test machine

 

Multifunctional Variable Data Printing System - DPBOX - IN-TIJ005

Multifunctional Variable Data Printing System - DPBOX

Thermal Inkjet printer Industry Applications

1. Packaging Industry: varlable barcode, numerlc, date, LOGO of outer carton packaging.

2. Pharmaceutical Industry: electronic product supervision code, numeric, date, logo, etc.

3. Bills or note Industry: clothing tag, animals labels and etc.

4. Label or Tag industry: clothing tag, animals lable, etc.

5. Security packaging: cigarette lables, wine lables and etc.

6. Card producting: scratch card, game card, prepaid phone card.

Multifunctional Variable Data Printing System Features:

1. It is with excellent dynamic variable barcode printing technology and high quality in inkjet printing of barcodes.

2. System supports DPBOX multiple cascading, Max, 6 sets of DPBOX controller cascading,

printing max width 12 inches(304.8mm)

3. Seamless joint between multi-printheads, its accuracy could be set in software

4. It can print dot-matrix font with printing resolution as high as 600*600 DPI with clear and

artistic effect

5. The inkjet printing speed can reach 304m/min(300*150DPI)

6. Has function to prevent date loss

Hardware Technical Parameters

DPBOX Size	286mm*260mm*73mm
DPBOX Weight	< 6kg
DPBOX Max. Print Width	1~24 printheads; 0.5 inch/printhead
DPBOX Interface	RS232C (DB9)(Continuous Ink Supply) DPBOX 100M Ethernet Printhead(x4)
Print Resolution and Speed	600x600 dpi(30m/min)   600x300 dpi(60m/min)     300x600 dpi(high-speed mode)   (60m/min)   600x200 dpi(30m/min)   600x150 dpi(120m/min)   300x300 dpi(high-speed mode) (120m/min)   300x600 dpi(30m/min)   300x300 dpi(60m/min)      300x200 dpi(high-speed mode) (180m/min)    300x200 dpi(30m/min)   300x150 dpi(120m/min)    300x150 dpi(high-speed mode)  (304m/min)
Ink-supply	Single HP Ink Cartridge, Bulk Ink Cartridge, Continuous Ink Supply System
Sensor	Support many kinds of External Sensors(NPN Sensor, Contact Sensor)
Synchronizer	300PPI synchronizer
Power Requirement	Single Phase, 110~240V AC 50/60Hz 3.2A Single Phase, 220~240VAC 50/60Hz 1.6A
Working Environment	Temperature 10℃~35℃, Humidity 10%~80%
Storage Environment	Temperature -15℃~85℃, Humidity 5%~95%, No Condensation Environment
	Software Technical Parameters
Operating System	Windows XP(Professional), other system needs especial declaration
Static Object	Static Text, Image and Barcode
Dynamic Object	Dynamic Text, Counter, Date and Barcode(Dynamic Bitmap needs customization)
Barcode Type	1D: EAN128, Code 25, Code 39, Code 93, Code 128, GS1 Databar, etc 2D: PDF417, Data Matrix, Maxi Code, QR-code, etc